Booting Your Raspberry Pi - Velleman Modules VM205 Mode D'emploi

Booting your Raspberry Pi

1. Connect your hardware and VM205 module to the Raspberry Pi, see pag 6 for the quick start guide.
On fi rst boot you will come to the raspi-confi g window
2.
Change settings such as timezone and locale if you want
3.
Finally, select the second choice: expand_rootfs and say 'yes' to a reboot
4.
The Raspberry Pi will reboot and you will see raspberrypi login:
5.
pi
Type:
You will be asked for your password
6.
raspberry
Type:
You will then see the prompt:pi@raspberry ~ $
7.
8. From the command line type:
#
before blacklist spi-bcm2708, so it looks like this #blacklist spi-bcm2708
9. Type
10. Once you're done, do following steps
• CTRL+O (save)
• ENTER (confi rm)
• CTRL+X (exit)
• sudo shutdown -r now
11. Start the desktop by typing:
12. You will fi nd yourself in a familiar desktop environment.
sudo nano /etc/modprobe.d/raspi-blacklist.conf
startx
- 7 -
Booting your Raspberry Pi Booting your Raspberry Pi