Snowbear TGS-325 Manuel Du Propriétaire page 12

SPREADER LID INSTALLATION
®
The SnowBear Tailgate Spreader comes standard with a rigid plastic lid. The lid is affixed to the spreader
hopper by two ball-loop stretch cords that are installed on the lid, and latched to the pre-installed catch
brackets.
Stretch the ball-loop cord and snap under the catch bracket and release. To remove the lid, pull on the stretch
cord and out from under the catch bracket.
SPREADER LID
7
12 | P a g e
BALL-LOOP
STRETCH CORD
®
SnowBear Tailgate Spreader (TGS-325)
Owner's Manual
CATCH
BRACKET
Revision 2