LG STYLER S3RERB Manuel Du Propriétaire page 27

Opening and Closing the Pants Hanger
1 To open, fold the hook down toward the
hanger blades to unlock and separate the
blades.
hook
hanger
crochet blades
lames du cintre
2 Once pants are inserted, bring the blades
together and rotate the hook up and away
from the blades to lock them in place.
Hanging Pants On the Pants Hanger
1 Remove all objects from pants pockets and
button the back pockets.
2 Fold pants along crease
lines (or where crease
lines would be), and
attach the pants hanger
at the ends of the pants
legs.
3 Tug gently on the sides of the pants legs.
Make sure pants are stretched tight within
the hanger, with no wrinkles, and will not
fall out of the hanger during the cycle.
4 Place the pants hanger on the moving
hanger or in the Pants Crease Care.
crochet
lames du cintre
Using the Pants Crease Care
1 Open the Pants Crease Care by pressing on
the icon on the side.
2 Hang the pants hanger on the hook above
the Pants Crease Care that best fits the
length of the pants being pressed.
If the pants are longer, use the higher hooks
to keep the pants from hitting the floor of the
cabinet.
Pants should be no wider than 38 in. (96 cm)
or longer than 43.3 in. (110 cm). Check the
size of the pants before using the Pants
Crease Care. If pants are too large, use the
moving hanger.
3 Make sure the pants
are hanging straight.
Check the creases on
the legs to make sure
they are lined up. If the
pants are not folded
properly at the creases
and hanging straight,
double lines may appear
at the pants' edges.
4 Close the Pants Crease
Care, then straighten
the pants once more.
Gently tug the edges of
the pants to smooth out
any wrinkles. Make sure
the pants are hanging
straight in the Pants
Crease Care.
OPERATION 27