Waste Removal (Cleaning Of The Dust Collecting Filter) - Ohyama IC-FAC2 Manuel De L'utilisateur

K

Waste Removal (cleaning of the dust collecting filter)

Please clear and clean regularly to maintain higher suction capabilities.
Remove the dust cup.
Press the buttons on either side of the dust cup to
remove it.
Remove the mesh filter in water.
To avoid splattering of dust, please remove the mesh
filter from the dust cup in water.
Clean the mesh filter .
Clean the dust stuck to the filter, then rinse the filter with
running water.
Soak the dust cup in water with a diluted clean agent for several minutes for
easy removal of accumulated dust.
Dry.
Place the dust cup and filter in a well ventilated area until fully dry.
※ When cleaning the mesh filter set, please do not use washing machine or other heated device as this may cause
product deformation.
Reassemble the mesh filter.
Place the mesh filter set back into the dust cup.
※ Pay attention to the direction.
● Please reassemble correctly to avoid damaging
Notice
Reassemble the dust cup.
Place the mesh filter in the dust cup, and then place the
dust cup back into the vacuum body until you hear it
click into place.
Please verify that both buttons are clicked firmly in place.
the product.
Dust Cup
Button
Dust cup
Dust cup
Button
7
IC-FAC2
Button
Mesh
Button
Click