Troubleshooting - Ohyama IC-FAC2 Manuel De L'utilisateur

K

Troubleshooting

Before making repairs, please read the following content carefully to fix common problems.
Status
Low Suction
● Filter is clogged.
● Dust cup is clogged.
Abnormal heating
● Filter is clogged, automatically turning
Abnormal
operation light,
low suction
● Sensor is coated in dust.
Not running, but
dust sensor is on
.Running, but dust
sensor is off
● Significantly lower suction.
● Plug is not inserted into the outlet
Stop operating
● "Protection mode" has been activated
● Room temperature is too low.
Hot air not heating
Problems that could not be solved
Please contact the dealer of purchase or Iris Ohyama Europe B.V. Customer Service Center.
IRIS OHYAMA EUROPE Customer Service E-mail
CustomerService@iriseurope.fr
Warning
Possible cause
power to LOW to prevent overheating.
※ Depending on the operation mode,
the humidity of the room, and the
environment, the operation light may
flash and decrease the power.
correctly.
to prevent overheating.
Do not disassemble, repair or modify the product yourself. Any other
servicing should be performed by an authorized service representative.
● Please clean or replace.
● Please remove dust.
● Please clean or replace.
● Please remove dust.
● Please clean sensor (P8)
● Please clean or replace filter, and empty
contents from the dust cup.
● Reinsert the plug and press the menu button.
(P5)
● Follow the "protection mode" instructions
carefully.
● Use in cooler rooms or use on LOW may take
longer to produce hot air.
10
IC-FAC2
Remendy