BELLOTA EPR132P Guide De L'utilisateur page 51

4.2 Precautions of pruners
1. Do not prune branches that exceed the cutting capacity of the shears; do not try to cut hard objects such
as metal and stone. If the blade is worn or damaged, replace it in time.
2. Keep the device clean. Use a clean cloth to clean the electric pruning shears, battery pack and charger (do
not use corrosive or solvent-based cleaners); use a soft brush or a dry cloth to clean dust on the shears
bit.
3. Do not immerse the electric pruning shears, battery pack and charger in any liquid such as water.
4. Please use the device according to the instructions for use. Do not use the electric pruning shears, battery
pack and charger if they are damaged.
5. If the switch fails to turn on or off the electric pruning shears properly, do not use it, given it is dangerous
when the switch fails to work. It must be repaired.
6. Ensure that the switch is turned off when making any adjustments, replacing accessories, or storing the
electric pruning shears. This protective measure will mitigate accidental starting of the electric pruning
shears.
7. Keep the unused shears out of the reach of children when the blade is closed. Do not let those who are
not familiar with the shears or don't understand the instructions operate it. It is dangerous for untrained
users to use it.
8. When using the shears and their accessories, please follow the instructions for use and the use methods
and take into account the working environment and the tasks to be done. Using them in any operation that
does not meet the requirements may result in a hazard.
9. After use, remove dirt on the moving blade and counter blade, coat the contact part with lubricating oil
or engine oil to make the blade under normal maintenance state, reduce the resistance for use next time
and extend the service life of the blade.
51