Technical Parameters - BELLOTA EPR132P Guide De L'utilisateur

1.2 Technical parameters

Pruning range
Ø max:
Ø min:
Basic information of the electric pruning shears
Pruner weight with battery
Pruner weight without battery
Operation voltage (max)
Maximun power
Working temperature
Type of battery
Maximun voltage
Rated voltage
Amperage or capacity
Power
Approximate range (each battery)
Charging tension
1.3 Instructions for use
1. Take the shears out of the case and insert the battery in the slot at the back.
2. Turn on the red On/Off switch, the light will go green.
3. When the shears first go on, they will beep twice; squeeze the trigger twice in a row so that the shears
start working.
4. Normal cut: press the trigger and the cutting blade will close, when the trigger is released the cutting
blade opens. To close the cutting head, keep squeezing the trigger until you hear three beeps in a row.
5. Before using the shears, press and release the trigger a few times to close the cutting blade effortlessly
and make sure that it is working normally.
32 mm
20 mm
950 gr.
710 gr.
16.8 V
500 W
-10ºC ~ 60ºC
BaterÍa de Litio-ion
16.8 V
14.4V
2.5 Ah
36 Wh
2-2,5 Hrs.
CA 110 V-220 V
43