Elipson A680 Mode D'emploi page 13

EN
WARNING
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS APPLIANCE
SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO OBJECT FILLIED WITH LIQUIDS SUCH AS
VASES SHALL BE PLACED ON APPARATUS.
Precautions for proper use
This product was designed according to rigorous norms and complies with safety standards. It should only
be used under normal conditions as described below. Verify the electrical voltage before connecting it
to a power source. This device was designed to work in numerous countries. We advise you to hook it up
completely before connecting it to the AC power source. Take care when unplugging the power cord.
When you unplug the power cord from the power source, do so by pulling on the head of the plug rather
than on the cable. If you do not expect to use this device for a prolonged period of time, you are advised
to unplug it from the power source. Do not open the case. This device contains no parts that can be exchanged by the
user. Accessing the inside of this device's case can lead to electric shock. Any modification to the product will nullify the
guarantee. If a foreign object or liquid falls into the case, contact your retailer to arrange for a technician to remove it from
the device safely
IMPORTANT SAFETY INSTRUCTION
Electricity is used to perform many useful functions, but it can also cause personal injuries and
property damage if improperly handled. This product has been engineered and manufactured
with the highest priority on safety. However, improper use can result in electric shock and / or fire.
In order to prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and prolong the service
life of your Sound Bar, please read the following precautions carefully before using the product.
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this
apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. 9. The battery shall not be exposed to excessive heat such as sunshine, fire or the
like. 10. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet. 11. Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and the point where they exit from the apparatus. 12. Only use attachments/accessories specified by the
manufacturer. 13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
14. Unplug this apparatus during lightening storms or when unused for long periods of time. 15. Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped. 16. The mains plug or an appliance coupler is used as a
disconnect device, the disconnecting device shall remain ready operable.
WARRANTY
Amplifiers have a limited 2 year warranty. This warranty includes 2 year parts and repair labor on all components.
The warranty extends only to the original purchaser of the product and not to any subsequent owner.
Elipson's obligation under these warranties is limited to repairing or replacing any component found defective in
material or workmanship under normal conditions of use with an equal and/or current product.
These warranties shall not apply to products which have been abused, modified, or disassembled.
Products to be repaired or returned under this warranty must be returned to the factory through an authorized
Elipson dealer with all transportation and insurance charges prepaid.
To claim repair under warranty
To claim repair or service under warranty you simply have to contact your local Elipson dealer, from whom your equipment
has been purchased. To ensure that you will be able to ship your damaged product in correct manner, always retain the
original packaging of your Elipson equipment. If you cannot contact your original dealer, or if you are using your Elipson
product outside the purchase country, you should contact Elipson national distributor in the residence country, who will
advise where the equipment can be serviced.
You can also visit our web site to check our contact information : www.elipson.com
To validate your warranty, you need to produce, as a proof of purchase, your original purchase invoice specifying the date
of purchase and stamped by your dealer.
©Elipson 2020 - Elipson is a registered trademark of AV Industry.
24
ELIPSON'S POLICY IS TO CONTINUOUSLY INCORPORATE
IMPROVEMENTS INTO OUR PRODUCTS.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
IF YOU HAVE ANY QUESTIONS, PLEASE VISIT OUR WEBSITE :
WWW.ELIPSON.COM
OR CONTACT US :
CONTACT@ELIPSON.COM
25