Product Introduction - acerpure pro Serie Manuel De L'utilisateur

Product Introduction

Product accessories
1
Machine Body
Remote control battery installation
Open
Open
1. Remove the battery cover by
pressing the left button lightly
and pulling the battery cover
down.
2 3
Filter
5
Power Cord
2. Place the battery
+
Remote Control
with Battery (CR2032)
Install
positive (+) side up.
Remote control precautions
The remote control must face the receiver directly (Face the remote control
●
downwards and aim it at the operation panel for use).
The usage range of the remote control is approximately within 500cm to the front
●
of the receiver; if the remote control is not faced towards the receiver, its usage
range will be reduced.
Do not place any obstacles between the receiver and the remote control.
●
Please keep the remote control properly; avoid impacts and dropping. Please
●
remove the battery when not using the remote control, and keep it in a safe place.
6
4
User Manual &
Warranty Card
Close
Close
3. Push the battery cover
back to its original outlet
and close it completely.