Troubleshooting; Other Information; Warranty - Zanussi KEZ80-SSBL Mode D'emploi

TROUBLESHOOTING

ISSUES
THE DEVICE DOES NOT
WORK, NO BUTTONS
LIGHT UP.
THE KETTLE DID NOT
START HEATING.
THE SCREEN
DISPLAYS "ER".
THE KETTLE STOPS
WORKING IN THE
MIDDLE OF THE
HEATING PROCESS

OTHER INFORMATION

Technical information
MODEL
POWER SUPPLY
POWER
KETTLE MAX CAPACITY

WARRANTY

The warranty of the product does not cover any use
that breaches the product instructions for use:
- an installation that does not comply with legal and
regulatory provisions (not having an earth
connection, moving the appliance during use
leading to a cut in the power cord or the supply and
drainage pipe, or
phenomena, such as lightning, flooding, and more
generally non-observance by the end user, the
installer or the reseller of the assembly and set up
conditions listed in the user booklets of the
products of the brand);
- abnormal use in the event of commercial,
professional and industrial use;
26
CAUSES
1. The appliance is not
plugged in.
2. The appliance is in standby
mode.
1. The jug is not in the correct
position.
1. The temperature sensor is
broken.
1. The appliance has too
much built-up limescale.
SPECIFICATIONS
KEZ80-SSBL
220-240V~ 50/60Hz
1850-2200W
1.7 L for boiling water
1.5 L for brewing tea
subsequent to external
www.zanussismallappliances.nl www.zanussismallappliances.be www.zanussismallappliances.fr
SOLUTIONS
1. Check whether the device is connected to
power supply.
2. Press the ON/OFF button to exit standby
mode.
1. Lift the jug and carefully place it back on its
base.
1. Take your appliance to the After-Sales
Services.
1. Descale your appliance.
- use that does not meet the conditions listed in the
instructions for use;
- exposure of the product to external conditions
affecting the product (rain, excessive humidity,
abnormal variation in electrical voltage);
- deterioration of the product due to shocks, falls,
negligence, user maintenance defects;
- transformation of
unauthorised technical specifications;
- a product transportation problem;
- cracks on enamelled products that are the
consequence of differences in sheet-enamel or
cast-enamel expansion and do not modify the
adhesion of the enamel;
the product and its