Subwoofer & Burial Cable Connections; Test System - Martin Logan OUTDOOR LIVING Serie Mode D'emploi

WIRING & SPEAKER INSTALLATION (CONT'D)
Subwoofer & Burial Cable Connections
Combine and twist
(clockwise) the red
wires (as shown
in the diagram)
from the amp, the
subwoofer and
to the adjoining
speaker . Secure
these three cables
using the provided
silicone-filled wire
connectors; Repeat procedure for Black wires . NOTE: You
may have to cut some of the speaker cable emanating from
the subwoofer to a more manageable size .

TEST SYSTEM

After all subwoofer and satellite connections are completed,
connect the wires to your receiver or amplifier .
IMPORTANT! Be sure not to let any stray'+' and'-'
strands touch each other. Touching strands will cause
a short circuit which could damage your amplifier.
Turn your receiver or amplifier 'On' and test the system with your
favorite music . If the speakers are operating properly, refill the
wire trench and enjoy your new subwoofers .
9
To Subwoofer
To Adjoining
To Amp
Speaker