Publicité
Les langues disponibles
Les langues disponibles
3. Place the file holder flat on the top plate and depth gauge of the
cutter.
4. (Figure M) Keep the correct top plate filing angle line of 30° on
your file guide parallel with your chain (file at 60° from chain
viewed from above).
5. (Figure N) Sharpen cutters on one side of the chain first. File
from the inside of each cutter to the outside. Then turn your saw
chain around and repeat the processes (2,3,4) for cutters on the
other side of the chain. Use a flat file to file the tops of the
rakers (portion of chain link in front of the cutter) so that they are
about .025" below the tips of the cutters.
6. (Figure O) Keep all cutter lengths equal.
7. If damage is present on the chrome surface of the top plates or
side plates, file back until such damage is removed.
CAUTION: After filing, the cutter will be sharp, use extra caution
during this process.
NOTE: Each time the chain is sharpened, it loses some of the low
kickback qualities and extra caution should be used. It is
recommended that a chain be sharpened no more than four times.
Storage
- When the tool will not be used for several months, wipe any metal
components with oil.
- Store the tool in a secure and dry location. The storage
temperature must always remain in the range of 41°F (+5 °C) to
104°F (+40 °C). Place the product on a level safe location.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by authorized
service centers or other qualified service organizations, always using
identical replacement parts.
Accessories
Replacement chain and bar are available from your nearest Black &
Decker service center.
Replacement chain catalog number RC600
The use of accessories not recommended in this manual may be
hazardous.
Service Information
All Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power tool
service. Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow
page directory under "Tools—Electric" or call: 1-800-544-6986 or
visit www.blackanddecker.com
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years
against any defects in material or workmanship. The defective
product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store
is a participating retailer). Returns should be made within the time
period of the retailerʼs policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a
Black & Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required.Black
& Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives
you specific legal rights and you may have other rights which vary
from state to state or province to province. Should you have any
questions, contact the manager of your nearest Black & Decker
Service Center. This product is not intended for commercial use.
13
Publicité
