Touchscreen Calibration; Gps11 Antenna Reception; Radio Fm; Background - jfsound X9 Serie Manuel

TOUCHSCREEN CALIBRATION

GPS ANTENNA RECEPTION

RADIO FM

1 Station Search
On the radio application press the buttons
dio station will stop automatically.
2. To change the volume press the following key this is an option
3. To automatically search for stations, press the following key
4. Sound effects and equalization
5. to type the frequency of the station that you want to listen to press the following button
To turn off the tuner, press the following button
6.

BACKGROUND

To change the background, simply drag the screen to the sec-
ond page and press for a few seconds anywhere blank. You
will then be prompted to choose a background from the in-
ternal gallery or from a file that may be inside the radio, or it
can be loaded directly from an external memory.
To start the application that calibrates the touchscreen,
simply press the touch slightly with 4 fingers at the same
time and leave them resting for a few seconds. Once the
application starts, press the red dots sequentially. After
the procedure, turn off the radio and turn it back on after
at least one minute.
To view GPS reception press applications
and start GpsTest
To have good navigation you need to have at least 5
green GPS bands. To carry out reception tests, the car
must be in an open place. It is recommended to install the
GPS antenna in areas of the car that have low insulation
outwards, some reception tests are recommended before
concluding the installation.
STATION MEMORY:
to store the desired station, it is enough
to hold down for a few seconds the posi-
tion in which we want to store it.
Auto-search for the listening station
Automatically receives and tunes in
to traffic alert messages
RDS Reception
By activating the TPY system the
radio will search for stations with the-
matic profile (where present)
to search for stations, when the tuning meets a ra-
27