jfsound X9 Serie Manuel page 25

VOLUME
VIDEO
ATTENTION: setting the blocking of moving videos is a legal obligation, the unlocking function is allowed
only for non-mobile workstations (exhibitors, audio consoles, etc.), when the JFsound radio is installed on
moving vehicles (vehicles, campers, trucks etc.) this option must always remain active.
JFsound srl assumes no responsibility for improper use of the product.
NAVIGATION
BLUETOOTH
SWC – LEARNING STEERING
WARNING: Cars with canbus steering wheel controls do not need this procedure.
WHEEL CONTROLS (only for cars with resistive steering wheel controls)
For the programming of resistive steering wheel controls,
follow these steps:
1-Click on CLEARALL
2-Press the button you want to program on the monitor
3-The button on the monitor starts flashing then press the
corresponding button on the steering wheel
4-if the command is captured the button on the monitor
will remain fixed blue in color
5-repeat the operation for all the buttons you want
schedule and exit the page
25
-Media volume
-Navigator volume
-Bluetooth volume
-Alert volume
-Volume of the system
-Enable video lock on the go
-Enable guidelines when reversing
-Enable collision alarm
-reverse the rear camera display
- Display the air conditioner (
-Selection of rear camera type (
— Select the default navigator
- Ratio of the volume of the navigation assistant
to the audio source
<File Path Selection Sample
The selection made assigns the
application to the NAVI cone >
-Automatic phone connection
-Automatic response
(predisposed cars only)
only cars prepared)
installers only)