JVC KW-NX7000 Manuel D'instructions page 6

Detaching/attaching the monitor panel
Detaching
1
While the unit is turned on:
Open/Tilt
Open
Eject
Close
Detach
Yes Detach?
The monitor panel opens by about 50°.
• It closes automatically when no operation
is done for about a minute.
Attaching
2
Tilt +
Tilt –
Exit
No
3
6
The monitor panel is
released.
Attaching plate
• The attaching plate closes automatically
about 10 seconds after the monitor panel is
released. Remove the monitor panel before
this happens.
Caution:
• Hold the monitor panel securely so
as not to drop it accidentally.
• Fit the monitor panel onto the
attaching plate until it is firmly
locked.
Soft case
(supplied)