Sygonix 2239867 Mode D'emploi page 2

Operating Instructions
Micro WLAN HD Camera 1080P
Item No. 2239867
Intended use
This product uses a wireless network to stream video.
The built in infrared LED lights will illuminate objects
up to 5 meters away in the dark. Motion detection
can trigger recording and push notifications to your
mobile device. Files are saved onto a microSD card
(not included). Power is supplied via the built-in
rechargeable battery.
It is intended for indoor use only. Contact with
moisture must be avoided under all circumstances.
For safety and approval purposes, you must not
rebuild and/or modify this product. If you use the
product for purposes other than those described
above, the product may be damaged. In addition,
improper use can result in short circuits, fires, electric
shocks or other hazards. Read the instructions
carefully and store them in a safe place. Make this
product available to third parties only together with
its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Camera
• USB cable
• Reset pin
• Stand
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.
conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Conrad connect
- Powered by Tuya
The product is compatible with the Conrad
Connect IoT platform at: www.conradconnect.com
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
Operating elements
4
5
1
6
7
8
2
3
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme temperatures,
direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• Maintenance, modifications and repairs must only
be completed by a technician or an authorised
repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Privacy
• It is the responsibility of the user to be aware of
all applicable laws and regulations that prohibit or
limit the use of cameras, and to comply with the
applicable laws and regulations.
• Recording and circulating an image of an
individual may constitute an infringement of their
privacy for which you may be held liable.
c) Battery
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery.
Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the
rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a certain
amount of heat is generated during charging.
1 IR LED
2 Lens
3 Base for stand
4 RESET button
5 Power ON/OFF
6 Status LED
7 Micro-SD card slot
8 MicroUSB charging port
Getting started
Camera
If you do not insert an SD card, motion
detection will not trigger a recording. An
alert can be sent via the "Smart Life" app
to your mobile device.
1. Charge the battery.
- Connect the product via the provided cable
to a suitable mains adapter with USB output
(not included).
Make sure the USB power source can
deliver sufficient current, otherwise you
may damage the source. Do not use a
USB port of a computer, keyboard or
USB hub without a power adapter as
the current supplied by these ports is
insufficient.
2. Format the MicroSD card.
- Use the FAT32 file system.
- Refer to your computer operating system
instructions for information about how to do this.
3. Insert the MicroSD card into the card slot, it
should "click" into place.
Mobile application
• Download
- Android and iOS apps are available from their
respective app stores.
- Search for "Smart Life - Smart Living".
• Operating instructions
- App operating instructions are available from
the URL listed in section "Up-to-date operating
instructions".
Connect to application
Refer to the app manual for further information.
Status LED
Colour Status Description
Red Flashing Ready for connection
slow
Red Flashing QR code read success
fast
Blue Flashing Connected to App
slow
Yellow On Charging
Yellow Off Fully charged
Technical data
Input voltage/current . ............................ 5 V/DC 1 A
Battery .................................................. 3.7 V 700 mAh Li-ion
MicroSD . ............................................... 8 - 128 GB (Class 10)
MicroSD format . .................................... FAT32
Resolution . ............................................ 1080 p
Recording (continuous) ........................ D aytime: 2 hrs
Night mode: 1 hr
Night vision distance . ............................ 3 - 5 m
Motion detection distance . .................... 5 m
Video segments . ................................... 10 min/file
Sensor type .......................................... CMOS
Focal length . ......................................... 2.6 mm
Viewing angle ....................................... horizontal 92°; vertical 60.5°
Internal microphone . ............................. yes
WiFi standard ....................................... IEEE 802.11 b/g/n
Frequency . ............................................ 2.412 - 2.472 GHz
Transmission power.............................. < 20 dBm
Transmission distance . ......................... 30 m (open area)
Operating conditions . ............................ -20 to +60 ºC, < 80 % RF (non-condensing)
Storage conditions . ............................... -20 to +80 ºC, < 80 % RF (non-condensing)
Dimensions (L x W x D) . ....................... 34 x 34 x 36 mm
Weight .................................................. 37 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Reset the camera
Use the included reset pin to press the RESET
button.
Camera stand
The adhesive may leave marks or
damage sensitive surfaces.
maximum adhesion, make sure the
contact area is smooth, dry and clean.
• Remove the adhesive backing from the base and
attach to a suitable surface.
• When making adjustments to the stand, always
hold the base of the stand against the surface to
prevent the adhesive from peeling off.
• Attach the camera to the magnetic platform.
Care and cleaning
• Disconnect the USB cable from the product
before each cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag
symbol and enter the product order
number in the search box. You can
then download the EU declaration of
conformity in PDF format.
Disposal
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations
and contribute to the protection of the
environment.
*2239867_v2_0720_02_dh_m_en
For