Publicité
Les langues disponibles
Les langues disponibles
For ease of carrying and hanging up for storage,
fold the Bathing Cushion as indicated (fig. 10) and
pass the 'handle' (C) through the slot between the
seat and backrest.
Maintenance
•
Clean the Bathing Cushion after each use.
NOTE: It is especially important to thoroughly
clean your Bathing Cushion after each bath if
'Dettol' or similar products have been added to
the bath water.
•
Regularly check that the suction cups are
secure and undamaged.
•
Check that the air hose is not damaged.
Cleaning
routine cleaning
•
Drain the bath water and fully inflate the Bathing
Cushion for cleaning whilst it is still in the bath.
Partially deflate the Bathing Cushion in order to
clean between the seat and base sections.
•
All components can be cleaned with a
proprietary non abrasive mild liquid cleaner
or disinfectant. Always follow packaging
instructions for using mild detergent products.
NOTE: Before using proprietary cleaners,
always test on an inconspicuous area.
•
Use a soft cloth when cleaning.
•
Do not wash the product in boiling water.
•
IMPORTANT: Following cleaning and regular
use, rinse thoroughly with clean water to
remove all soap deposits. Wipe dry or leave to
air dry. Do not leave in bright sun light. Do not
dry using hot air.
disinfection
•
The Bathing Cushion should be fully inflated and pre-cleaned by washing with detergent and water
and then disinfected using either buffered hypochlorite (such as 'Milton' solution) or a hard surface,
alcohol impregnated wipe. Partially deflate the Bathing Cushion in order to disinfect between the seat
and base sections.
Storage
Ensure that the Bathing Cushion is clean and thoroughly dry before storing. Store in a dry environment.
6
10
C
Publicité
