4.7 Sliding tube stop
The sliding tube stops limit the sunshade inclination.
They prevent the sunshade being adjusted to too great
an inclination.
4.8 Sw i v e l f o o t
The swivel foot is mounted in the lower part of the
pipe solid.
It allows positioning of an umbrella around its axis
(360°). Adjustment is performed with the locking
pin positioning.
Caution:
Before removing the sunshade from the
base, it is necessary to block the function
of rotation.
4.9 Protective cover
The protective cover, made of weather-resistant PE
fabric, protects the sunshade from damage to the
frame arms and the canopy material in any weather.
Despite this the sunshade should not be left out in the
open in extreme weather conditions such as storms or
heavy frost, but should be kept in a dry and protected
location.
Fittings
7