Hilti SF 4-A22 Mode D'emploi Original page 16

Ambient temperature for operation
Storage temperature
4.2 Accessory tools – permissible diameters
Keyless chuck clamping range
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
Ø drill bit (metal)
4.3 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Operation
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery. → page 8
10 English
SF 4-A22
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)
SF 4-A22
1.5 mm ... 13 mm
1/16 in ... 1/2 in
1.5 mm ... 25 mm
1/16 in ... 1 in
1.5 mm ... 14 mm
1/16 in ... 35/64 in
1.5 mm ... 10 mm
1/16 in ... 25/64 in
21.6 V
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ... 45 ℃)
2253605
*2253605*