Ac And Dc Voltage Measurements; Resistance Measurement - Indu-Sol EmCheck LSMZ I Notice De Fonctionnement

4.3. AC and DC voltage measurements

600V CAT III 100A
Press 2 Sec
HOLD
50 / 60Hz
OFF
A
mA
V
V
Hz
PEAK ZERO
600V

4.4. Resistance measurement

600V CAT III 100A
Press 2 Sec
HOLD
50 / 60Hz
OFF
A
mA
V
Hz
PEAK ZERO
600V
28
Set the switch to V~ for
an AC voltage
measurement and to V=
for a DC voltage
measurement.
Connect the red test cord
to the "+" input terminal
and the black test cord to
the "COM" input
terminal.
Then place the probe
tips in contact with the
points where the AC
voltage is to be
measured.
Read the result on the
display unit.
Set the switch to Ω.
Connect the red test cord to
the "+" input terminal and
the black test cord to the
"COM" input terminal.
Place the probe tips in
contact with the points to be
measured and read the
result on the display unit.
Note: Before making a
measurement on a circuit,
check that it is Off and that
ANY capacitors are
discharged.
EmCheck LSMZ I
English