While In Use; Symbols; Instructions; Maintenance - Indu-Sol EmCheck LSMZ I Notice De Fonctionnement

1.1.2. While in use

Never exceed the maximum safe values indicated in
•
the specifications for each type of measurement.
When the clamp-on meter is connected to the
•
measuring circuits, do not touch any unused
terminal.
Before changing functions, disconnect the measuring
•
cords from the circuit being measured.
Never perform resistance measurements on a live
•
circuit.

1.1.3. Symbols

Refer to the operating manual
Se reporter à la notice de fonctionnement
Risk of electric shock
Risque de choc électrique
Double insulation
Isolation double

1.1.4. Instructions

- Before opening the instrument,
you must disconnect it from the measuring circuits
and check that you are not charged with static
electricity, which could destroy internal components.
A "qualified person" is someone familiar with the
-
installation, construction, use, and hazards. He/she is
authorized to start up and shut down the installation
and equipment, in conformity with the safety rules.

1.1.5. Maintenance

Clean the instrument with a damp cloth and soap. Do not
use abrasive substances or solvents.
20
English
EmCheck LSMZ I