Publicité
Les langues disponibles
Les langues disponibles
Problem
Individual
Colorfalls within a
larger system not
working /
displaying
different colors
Smart Module is
not responding
to app
Lights
intermittently
responding to app
Water Leaking
from Colorfalls
body
Diminished water
flow
Waterfall sheer
is splitting
Possible Cause
Improper connection
to Splitter / Smart
Module
Defective 4-outlet
Splitter
Loose connection.
Moisture or corrosion
in connections
Failed LED light bar
Failed Light Bar
App is not synced with
Smart Module
Loose connection.
Moisture or corrosion
in connections
Bad plumbing
connection
Gasket out of place
Screws in back plate are
too loose
Blocked pump intake
Obstruction in
plumbing line
Debris in Colorfalls
spillway
Debris in Colorfalls
spillway
Possible Solution
Verify connections are aligned
Switch positions with a working light on the same
Splitter to identify if the splitter is causing the issue.
Inspect quick-connected plugs for moisture,
corrosion or missing gasket.
Clean/dry/apply dielectric grease and reassemble.
If possible, switch out the light bar with one from a
working light of the same model to determine if the
driver has failed.
If driver has failed, replace light light bar.
If test diode works, replacement light bar are
available.
If possible, switch out the Light Bar with one from a
working Colorfalls of the same model to determine
if the driver has failed.
Replacement Light Bars are available.
Reconnect Smart Module through Bluetooth
Inspect quick-connected plugs for moisture
or corrosion.
Clean/dry/apply dielectric grease and reassemble.
Inspect all plumbing & plugs
Ensure gasket in back plate is in proper position
Ensure screws are fully tightened
Clear debris from pump intake.
Inspect plumbing line and clear any debris
Refer to Maintenance section on page 5
Refer to Maintenance section on page 5
7
Publicité
