Cv Table For Fx (Mm) - Marklin Digital 60940 Manuel

CV
Explanation
1
Address 1 (main address)
2 Minimum speed (Vmin)
3
Acceleration delay (AV)
4
Braking delay (BV)
5 Maximum speed (Vmax)
8
Decoder reset (default or factory setting)
17
Address 3 (2nd consecutive address)
18 Address 4 (3rd consecutive address)
Braking mode:
no braking
DC voltage, polarity against the direction of
27
travel
DC voltage, polarity with the direction of
travel
fx/mfx properties
* () = 6021 Control Unit {} = the values entered are multiplied times "x" (factor).

CV Table for fx (MM)

Values Default
1-255 (1 - 80)* 78
0-255 (1 - 80)* 5
0-255 (1 - 80)* 25
0-255 (1 - 80)* 16
0-255 (1 - 63)*
255
{x4}*
8
0-255 (1 - 80)* 254
0-255 (1 - 80)* 253
0 - 48
0
16
48
32
48
Notes
Address is always active and is not subject
to CV 49..
Speed at the smallest speed level. Value
must be smaller than Vmax, CV 5.
CV value multiplied by 0.25 gives the time
from complete stop to maximum speed.
CV value multiplied by 0.25 gives the time
from Maximum speed to complete stop.
Speed at the highest speed level. Value must
be greater than CV 2.
Value is not written.
Address can be deactivated/activated
subject to CV 49.
Address can be deactivated/activated
subject to CV 49.
Braking subject to direction:
- 16 normal DCC properties
- 32 inverse DCC properties
Braking not subject to direction:
- 48: fx/mfx properties
29