Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

operating instructions, tips

RACK DRY

Installing the drying rack
1. Open the dryer door.
2. Place the Drying Rack inside the product, and then align the holes of the filter handle of the
Drying Rack to the front projections.
3. Place the rear legs in the two recessed areas of the dryer's back wall, and then push down
the middle of the drying rack to fix it in place.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Press the RACK DRY button in Time Dry cycle, and then select the time according to the
moisture and weight of item.
Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer time is needed.
Drying Rack
Place the Drying Rack inside the dryer, align the holes of the filter handle of the Drying Rack
with the front projections, and then secure the back of the Drying Rack.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
and create a fire hazard.
WARNING
In case of Model is not supplied Drying Rack, you can purchase it through a service center.
28_ operating instructions, tips
DVDV476_484_03022E-03_EN.indd Sec6:28
DVDV476_484_03022E-03_EN.indd Sec6:28
Door
SUGGESTED TEMP. SETTINGS
Extra Low ( Time Dry cycle)
Extra Low ( Time Dry cycle)
Air Fluff
Air Fluff
Air Fluff
2013-06-28
2013-06-28
7:24:34
7:24:34

Publicité

Table des Matières
loading

Table des Matières