Installing The Battery On An Electronic Lock - Winchester 2012 Manuel Du Propriétaire

(1) 9v Alkaline Battery
Bottom of Keypad
(Remove Screw)
Installing the Battery on a LA GARD Electronic Lock
Step 1
Locate the battery.
Step 2
Remove the
Phillips head
screw from the
battery cover
located on the
bottom of the
keypad.
Step 3
Connect the battery
and gently insert the
battery up inside the
keypad and replace
the battery cover.
Step 4
Re-Install the
Phillips head
screw in the
battery cover.
DO NOT OVER
TIGHTEN !
4