Samsung 6 Serie Mode D'emploi page 37

Masquer les pouces Voir aussi pour 6 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
Setting Up Anynet
¦
+
Setup
Anynet
(HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet
+
When the
Anynet
+
Auto Turn Off (No / Yes): Setting an Anynet
The active source on the TV must be set to TV to use the Anynet+ function.
Even if an external device is still recording, it may turn off.
Switching between Anynet
¦
1. Anynet
devices connected to the TV are listed.
+
If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
Only when you set
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the
Make sure to switch to an Anynet
Recording
¦
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
When the recording device is not displayed, select
2. Press the
button to exit.
EXIT
You can record the source streams by selecting
Pressing the
� (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
(HDMI-CEC) function is disabled, all the Anynet
Device to turn off automatically when the TV is turned off.
+
Devices
+
Anynet
(HDMI-CEC) to On in the Application menu, the Device List menu appears.
+
device by using the Device List.
+
(HDMI-CEC) must be set to On.
+
related operations are deactivated.
+
button, you cannot use the Anynet
SOURCE
Device List and press the Red button to search devices.
Recording: (device_name).
function.
+
37
English

Publicité

Table des Matières
loading

Table des Matières