English; Important Safety Information - Go A 2024 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
English 

Important Safety Information

Please observe the following information to ensure reliable operation of the
laminator:
Read this manual thoroughly and observe the instructions and
information in it when operating the device.
Keep the operating manual in a safe place for future reference.
The device may only be operated indoors in dry rooms which are well
ventilated.
The device must be set down on a level surface and may only be used
when horizontal.
Do not use the device in the vicinity of hot surfaces or in damp
environments and protect it from direct sunlight and dusty conditions.
Ensure that the power switch is in the "OFF" position before connecting
the laminator to the mains power supply.
The mains power socket and power connection on the device must be
freely accessible for reasons of safety, namely to enable the power
supply to be disconnected quickly in an emergency!
Switch the device off immediately if a strong smell comes from it.
Switch the device off when it is not being used.
Disconnect the power plug when the device is not in use.
Prevent damage to the power plug and power cable. Never twist or kink
the power cable nor set it down on hot surfaces. Do not operate the
device if the power cable or power plug is damaged.
Never take hold of the power plug with damp hands.
Keep loose clothing, ties, jewellery, long hair and other loose objects
away from the device. Risk of injury!
Children must not be allowed in the vicinity of the device when it is
ready to operate.
Ensure no pets can get near the device.
Always use the lamination foil pockets recommended for the device
(refer to "Features"). Using lamination foil which is too large could lead
to the unit jamming.
Do not use foil pockets intended for cold lamination for hot lamination.
This could damage the device, foil pockets and document.
Never cut lamination foil to size. The resulting cut edges could cause
the lamination foil to jam.
Never use foil pockets which are soiled. Clean them beforehand, if
necessary, using a soft, slightly damp cloth.
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A 2048A 3024A 3048

Table des Matières