SUMIKO S.9 ACTIVE SUBWOOFER
!
SUMIKO S.9 ACTIVE SUBWOOFER
TECHNICAL SPECIFICATIONS
!
Loudspeaker Type
Drive unit
Passive tuning unit
Amplifier Type
Power amplifier
Frequency response (in room)
@-6dB/@-3dB
Mains input voltage
Fuse
System protection
Controls
Additional features
Audio signal inputs
Power consumption
Finish
Dimensions (WxHxD)
Supplied accessoires
!
!
___________
TECHNICAL SPECIFICATIONS
Passive radiator, bass-reflex loaded, down-firing woofer
1 x 260mm (10") very long throw, treated paper cone, wide
rubber surround woofer
1 x 260mm (10") very long throw, treated paper cone, wide
rubber surround
High linearity Class AB
350W rms, 700W peak
From 25/35 Hz to Fc
(Fc user adjustable)
Factory selected, 120Vac - 60Hz or 230 Vac - 50 Hz
T6.3A (110Vac, 60Hz); T3.15A (230V, 50Hz)
- Output signal short circuit
- Over-heating
- DC fault
- Independent Master and LFE volume controls;
- Continuously adjustable Crossover frequency (30 to 120Hz),
slope 24dB/oct;
- Signal phase inversion switch (0/180°)
Auto switch-on/off (deselectable)
- LFE (Low Frequency Effect) signal, phono plug;
- Line level signal, single phono plug;
- High level signals, Neutrik 4-pole Speakon©
<= 0.5 W (Stand-by)
Rated power 450W
Gloss White or Grand Piano Black
355x405x411mm; 14x15.9x16.2 in.
Including feet
- User manual
- Mains lead
- 10m/32.8 ft Neutrik Speakon© interconnection cable