Cisco Systems Linksys PSUS4-UK Guide D'installation Rapide page 3

2
Configuring the PrintServer
A
Insert the Setup CD-ROM into
the computer's CD-ROM drive.
The Setup CD-ROM should run
automatically. If it does not,
click the Start button and
choose Run. In the box that
appears, enter D:\setupWiz-
ard.exe (if "D" is the letter of
your CD-ROM drive).
B
When you see the Welcome
screen, Figure B, click Setup
Wizard to continue.
C
The screen in Figure C will
appear while the Setup Wizard
is searching for the USB Print-
Server.
D
After the Setup Wizard has
found the USB PrintServer, the
screen in Figure D will appear.
If this is the first time you have
run the Setup Wizard, make
sure that List only new (uncon-
figured) Print Servers is
selected and your Print Server is
listed by its default server
name. If you have previously
configured the Print Server,
select List all compatible Print
Servers. Click Next to continue.
E
The Password screen, Figure E,
will appear next. Enter the
default password admin in the
field. Click Enter.
B
C
D
E
3