Introduction; 2-Way Led Remote Control; Control Center - Automate D9857A Mode D'emploi

Introduction

2-Way LED Remote Control

Feature
Internal Antenna
Command Buttons (4)
Function Button
Function Level/Confir-
mation LEDs
Micro-USB Port

Control Center

LED
The Control Center sends and receives commands or messages to
and from the system. It consists of:
• The antenna, for system communication.
• The Status LED, as a visual indicator of the system's status.
• Valet button, for accessing various feature, programming,
and reporting functions of the system.
© 2017 Directed. All rights reserved.
Description
Used for transmitting and receiving information.
Used to perform Arming, Disarming, Auxiliary channel
and Remote Start commands.
Used to access function levels for commands, configu-
ration menus for programming, Car Selection, and to
request reports, as well as 2-way remote battery voltage.
Each button has an associated LED next to it that are
active during related operations. These LED's are labeled
respectively as: Arm LED, Disarm LED, Remote Start LED
and AUX LED.
The USB cable plugs into this port to charge the battery
(located on remote control side).
Antenna Button
3