Kickplate Installation - AGA MARVEL MP42SS2 Instructions D'installation

Installation
15
Lift unit off rollers to desired height and level unit using
a 5/16" head wrench. NOTE: DO NOT use an electric
device. Overtightening can cause damage.
17
Make sure evaporator pan is in correct location.

Kickplate Installation

18
Align holes on both ends of louvered panels
and insert screws.
16
Insert mounting screws into 2x4 attached to wall stud
19
Using a Phillips screwdriver, attach the
kickplate to the unit and adjust to desired height.
27 27
Screw
Wall
2 x 4
Refrigerator