Recommended Use; Technical Specifications; Noise Conditions - Fox F12-943A Manuel D'instructions

WARNING:
Extension cables must be arranged away from the working area in order that they do not get in contact
with the workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
This tool has been designed for drilling steel, metals, wood, plastics and all kind of materials in general,
except for hardened steel, by using suitable bits and by selecting the suitable speed according to the
material you are cutting and the tool you are using.
Motor power:
Speed:
Drill bit dimensions:
Max drilling capacity:
Chuck – column distance:
Chuck stroke:
Workbench dimensions:
Morse cone:
Height:
Net weight:
The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level
- Sound power level LWA = 79.4 dB(A)
- Uncertainty of measurement K = 3 dB.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if there is a
connection between emission levels and exposure levels, the first ones cannot be used to determine
safely if other precautions are necessary. The factors that can influence the actual exposure level of the
operator include exposure length, environment features and other sources of noise, as for example the
number of machines and operations present. Besides, exposure levels can change from country to
country. However, these instructions enable the user of the machine to better evaluate the dangers and
risks.
Drill press noise emission is very low and thus not dangerous for the user, however, if other tools are
working or in case of noisy environment ear protection devices could be necessary.

RECOMMENDED USE

TECHNICAL SPECIFICATIONS

F12-943A
460 W S1
210-2220 min-1
3 - 16 mm
16 mm
169 mm
80 mm
270 x 270 mm
MT2
1507 mm
53 kg

NOISE CONDITIONS

LpA = 63.4 dB(A)
27