English
Step 4: Connect the USB cable of the car charger to the USB port of the
DVR, and insert the car charger into the cigarette lighter, then the
installation is finished.
Cautions:
a. During the installation, the surface that the suction cup attaches
should be smooth.
b. When adjusting the angle, please stop doing it when the bracket can
not be switched. Be careful that do not use too much power to
damage the bracket.
c. Remove the bracket, please hold the middle part of the bracket by left
hand, and open the lock on the bottom of the suction cup by right
hand. Then hold the soft rubber suction cups to remove the handle.
Remember that do not use too much power because it is easy to
damage bracket.
Cigarette lighter
Step4
6