Trevi 106-206-118-218 Instructions D'assemblage page 7

8
Attach the uprights to the bottom plate with two (2) screws "Z",
which you will find in the hardware bag.
9
Put the top plate on the upper side of the upright, and secure with
two (2) screws "Z" on each side.
10
Be sure to have a vertical (plumb) upright before fixing the top seat.
Place the top seat on the upper side of the upright.
106-206
UPRIGHT POST INSTALLATION
UPRIGHT POST TOP PLATE INSTALLATION
TOP SEAT INSTALLATION
SCREW ''Z''
TOP SEAT
TOP PLATE
Uprights must be installed inside the flanged part of the bottom plate
and into the two notchs of the bottom track.
106-206
Center the top seat between the two uprights and secure with four
(4) screws "Z".
118-218
118-218
SCREW ''Z''
TOP SEAT
TOP PLATE