Anomaly
It does not start
It does not detect the jar
The appliance returns to
start without processing the
ice-cream
The appliance takes a very
long time to make the first
portion
The jar opens during
processing of the ice-cream
Specifications:
- Maximum absorbed power: 800 W
- Degree of protection: IPX1
- Approx. weight : 15 Kg
- Maximum capacity of the 1L ice-
cream vessel
Appliance unsuitable for use in the
presence of flammable anaesthetic
mixtures with air, oxygen or nitrous
oxide.
These specifications are subject to
change without notice of purpose of
improvement.
By virtue of the conditions of
fabrication of this product, the
maximum absorbed power can differ
from that specified.
Repair
Check that it is connected to the mains.
Check that the main switch is in the "ON"
position.
Check that the jar is properly positioned and has
correctly reached 90º from the start
Check that the jar lid has been fitted.
Check that no left-over ice-cream is hindering
the positioning of the jar.
Possible overheating of the motor. Allow the
appliance to cool down.
Ice-cream very soft or a temperature over -18ºC
that the appliance cannot detect.
Check that the jar lid has been fitted.
Check that the blade is correctly positioned.
For EU product versions and/or in case
that it is requested in your country:
Ecology and recyclability of the
product
- The materials of which the packaging
of this appliance consists are included
in a collection, classification and
recycling system. Should you wish to
dispose of them, use the appropriate
public recycling bins for each type of
material.
The product does not contain
concentrations of substances that
could be considered harmful to the
environment