í
Attaching the Provided Strap
1.
Attach the strap as shown.
í
Inserting the Provided Card
1.
Make sure the lens barrier is closed and nothing is displayed on the monitor.
2.
Open the card cover.
3.
Insert the battery in the direction shown in the figure.
4.
Close the card cover until it clicks.
Note ..........................................................
¼ Be sure to hold the card so that the cut corner is positioned correctly. There
is an arrow inside the card cover, indicating the insertion direction.
¼ To remove the card, hold the card with your fingertips, and pull it out in the
direction of the arrow
Card insertion direction marking
.
A
(SmartMedia)
7