SPARKY UDD 16 Notice Originale page 6

Press READ
button
Measurement
begins
Have you pressed
READ button for
less than 2 s?
YES
The device performs
only 1 measurement
The distance value
appears on the display
AREA MEASUREMENT
▪ Once the device has been switched on, press
MODE button to select measuring area. Press
READ button to measure the length L, press
READ button again to measure the width W.
Then the second line of the screen will display
the value of the area.
▪ Press MODE button to clear the display.
▪ Press READ button to display the length L,
press READ again to display the width W.
VOLUME MEASUREMENT
▪ Once the device has been switched on, press
MODE button to select measuring volume.
Press READ button to measure the length
L, press READ button again to measure the
width W, press READ for the third time to
display height H. Then the second line of the
screen will display the value of the volume.
▪ Press MODE button to clear the display.
▪ Press READ button to display the length L,
press READ again to display the width W,
press READ for the third time to display height
H.
4
EN
The device
performs 2
measurements
per second
The device
NO
measures distance
continuously
NO
Have you
released READ
button?
YES
ACCUMULATING RESULTS
In this mode upon restarting data collection, the
new data are added to the old ones.
Length accumulation
▪ Press MODE button to select measuring
length.
▪ Press READ button, and then +/= button. The
result will be shown on the display.
Area accumulation
▪ Press MODE button to select measuring area.
▪ Press READ button to measure length L,
press READ again to measure width W.
▪ Press MODE button for 2 seconds, the display
will show M+, the device will beep and the re-
sult will be stored in memory.
▪ Press MODE button to clear the current data
from the display.
▪ Press READ button to measure the next
length L, press READ again to measure the
next width W.
▪ Press +/= button.
▪ Press +/= button for 2 seconds, the device
will beep, the display will show the last stored
value and the symbol M+ will disappear.
▪ Press +/= button to get double accumulation,
the symbol M+ will disappear.
▪ Press MODE button for 2 seconds, the display
will show M+, the device will beep and the cur-
rent result will be stored in memory.
Volume accumulation
▪ Press MODE button to select measuring
volume.
▪ Press READ to measure length L, press
READ again to measure width W, press
READ for the third time to measure height H.
▪ Press MODE for 2 seconds, display will show
M+, the device will beep and the result will be
stored in memory.
▪ Press MODE to clear the current data from
the display.
▪ Press READ to measure the next length L,
press READ again to measure the next width
W, press READ for the third time to measure
the next height H.
▪ Press +/= button.
▪ Press +/= button for 2 seconds, the device
will beep, the display will show the last stored
value and the symbol M+ will disappear.
▪ Press +/= button to get double accumulation,
MFD 16