Ultrasonic Distance Detector Safety Warnings; Know Your Product; Operation - SPARKY UDD 16 Notice Originale

III – Ultrasonic
distance detector
safety warnings
Before using the measuring tool, familiarize
yourself with all the operating features and safe-
ty requirements.
▪ The measuring tool is delivered with a warning
label in English. Prior to initial starting, attach
the supplied sticker in your national language
over the warning label in English.
▪ Do not direct the laser beam at persons or ani-
mals. Do not stare into beam.
▪ This measuring tool emits class 2 laser radia-
tion according to EN 60825-1. This can lead to
persons being blinded.
▪ Pay attention to the correct polarity when in-
serting the battery according to the marking in
the battery compartment.
▪ Remove the battery from the measuring tool
when not using it for more than 3 months to
prevent leak, and store it in a cool and dry
place
▪ If the battery is leaking, remove the battery,
wipe away the liquid from the compartment
with a soft cloth avoiding contact of your skin
with electrolyte.
▪ Do not allow children to use the laser measur-
ing tool without supervision. They could unin-
tentionally blind other persons or themselves.
▪ The measuring tool must be repaired only by
qualified technicians in authorised SPARKY
service centres using original spare parts to
ensure preserving the functions for safe op-
eration.
Original instructions
Max. radiant power ≤ 1mW
Wave length 650 nm
EN 60825-1:07
LASER BEAM
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IV – Know your product
1. LCD
2. ON / OFF button
3. Mode selection button
4. Bubble level
5. Metric and British unit conversion button
6. Measurement mode button
7. Data accumulation/equal button
8. Battery cover
9. Ultrasonic transmitter tube
10. Laser line
BUTTON FUNCTION
ON/OFF
Switching on / switching off
button
FT/M Converts between metric and
British units / Switches to tem-
perature measuring mode
MODE
Selects the measuring mode:
length, area, volume or clears
the display
READ Switches to measuring dis-
tance mode
+ / = Measuring and accumulating
length, area and volume
V – Operation
This measuring tool is radio suppressed in com-
pliance with EMC Directive 2004/108/EC.
This tool is designed for measuring distances,
accumulating lengths, widths, heights, calculat-
ing areas and volumes. The measuring tool is
suitable for interior and exterior construction site
measuring, finishing and repair activities.
LENGTH MEASUREMENT
Press ON/OFF button to switch on the device
and then press MODE button to select distance
measurement mode.
3
EN