Phoenix Mecano RK Rose+Krieger CLASSIC N RF Notice D'assemblage page 27

6.3 Start-up
6.3.1 RF receiver
The remote hand switch is logged on using the 1 key on the
RF receiver.
The drives are run in by pressing the 1 key.
Log the remote hand switch onto the RF re-
ceiver. Only one remote hand switch can be
operated with an RF receiver (1 RF receiver +
1 remote hand switch = radio system). The
red LED on the remote hand switch lights up
when the communication with the wireless
receiver functions correctly.
•
If the wireless routes of several wire-
less systems overlap, several RF recei-
vers may react to one remote hand
switch. One of the wireless systems
must be logged on again.
•
Simultaneous actuation of remote
hand switches with overlapped wire-
less system may lead to malfunctions
of the drive during operation.
Fig: RF receiver
Fig: Hand switch
6. Life Phases
1
27