Features; Assembly - Hart HGHBL02 20V Manuel De L'opérateur

FEATURES

PRODUCT SPECIFICATIONS
Motor .............................................................................................................................20V DC or 120V, AC only, 60Hz, 3.0A
Air Velocity .................................................................................................................................................................170 MPH
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.

ASSEMBLY

UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts in the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
PACKING LIST
20 Volt Hybrid Blower
Blower Tube
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure while blowing.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack or
unplug the power source from the product when
assembling parts.
WARNING:
This product is intended for blower use only and is not
designed for vacuum use. Do not attempt to remove
the main reducer housing that covers the impellers.
Removal of the main reducer housing will expose
the moving impellers and contact with these impeller
blades can result in serious personal injury.
ATTACHING THE BLOWER TUBE
See Figure 2.
 Slide blower tube onto blower housing until the button
on the blower housing clicks into the slot on the tube.
 To remove, depress the button on the blower housing
and remove the tube.
7 – English