How To Use; Preparing And Repairing The Puncture - Procycle 10031208 Mode D'emploi

CAUTION!
Risk of injury!
• When cutting off the repair string, make sure that you handle
the knife carefully in order to avoid lacerations.

4 | How to use

4.1 | Preparing and repairing the puncture

Check the tyre and, if necessary, remove any object which may be in the puncture.
It may be necessary to use pliers or a similar tool to remove some
objects.
Insert the 2-in-1 repair tool (1) into the
hole in the tyre. Clean the puncture by
inserting and removing the awl into the
course of the damaged spot multiple
times. Any dirt must be removed from
the puncture. The diameter of the
puncture must not exceed a maximum
of 4.5 mm.
Peel a repair string from the protective
film, thread it through the eye of the
needle on the repair tool and apply the
special adhesive.
15