Sauber SB60 Mode D'emploi page 15

CLEAN THE DUST BARREL
1. Press the button on the dust barrel arm.
2. Lift dust barrel up.
3. Press the button on low end of dust barrel to open the dust barrel cover.
Removing & cleaning motor filter, plastic dust filter and air outlet filter.
Warning: Always unplug the unit from electrical outlet before getting out the dust barrel.
a. Motor filter
1. Press the button on the dust barrel arm.
2. Lift dust barrel up.
3. Pull up the buckle to release the filter lock.
4. Take out the motor filter for cleaning and changing.
Notes:
1. Make sure to dry the motor filter thoroughly before placing it back.
2. Never use the vacuum cleaner without a motor filter.
b. Plastic dust filter
1. Press the button on the dust barrel arm.
2. Lift dust barrel up.
3. Release the filter lock and take out the motor filter
4. Take out the plastic dust filter.
5. Use a soft brush to clean the plastic dust filter then rinse it with clean water, dry it thoroughly before placing
it back.
filter lock
- 14 -
motor
filter
plastic dust filter