Autoadapt BraunAbility A Série Manuel D'installation page 37

Adjusting the inclination
1
The inner platform (bridge plate) should be level with the floor. If necessary, adjust the incli-
nation as illustrated below.
2
Adjust the cam. Ensure the wheel is straight in relation to the cam. Failure to do so can cause
damage the bridge plate.
3
Manually deploy the travelling frame, see separate emergency instruction, in order to ensure
the platform moves freely in an out of the cassette. If it does not, it may be because the
mounting brackets are over tightened and may have deformed the sides of the cassette. The
brackets should be adjusted if this is the case.
Cam
Ensure the wheel is straight
in relation to the cam.
Lock the new position
with the nut.
Lock the new position
with the nut.
Wheelchair lifts A-Series, under vehicle
Bridge plate inclined upward
Use a screwdriver to turn the stay clock-
wise to shorten it and lower the bridge
plate.
Bridge plate inclined downward
Use a screwdriver to turn the stay
anticlockwise to lengthen it and raise the
bridge plate.
37
EN