Publicité
Les langues disponibles
Les langues disponibles
Instruction Manual
This tool is designed for sanding or polishing.
No other use is permitted.
Air Supply Requirements
Tool is designed to operate at 90 psi (6.2 bar) at free speed
measured at the tool, of clean, dry air. Operating this tool at higher
pressures will drastically reduce the tool life and could cause injury.
Whip Hose
Do Not Install
Quick Coupling
Nipple
Here
Leader
Quick Coupler
Hose
The air inlet thread on this tool is a standard 1/4" NPT. Line
pressure should be increased for any unusually long air hose run
EC DECLARATION OF CONFORMITY
We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest, SC
29690, declare under our sole responsibility that the product to
which this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on the
approximation of the laws of the Member States relating to
machinery. (EN792, 98/37/EC)
Harmonized Standards Applied: TC255N, EN792-6
National Standards Applied: EN 28662-1 & EN28662-7:1997
for Vibration Level. EN ISO15744:2002 for Noise Level
Machine Name: SX7120 2"-3" Mini Surface Prep Tool
Serial No.: NK0110101 or higher
Free Speed: 15,000 RPM
Air Pressure: 90 psi (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 81 dBA sound pressure
with 3 dBA uncertainty per EN ISO15744. Vibration level
is 2.9 m/s2 tested per RE ISO 28927-3.
EC DECLARATION OF CONFORMITY
We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest, SC
29690, declare under our sole responsibility that the product to
which this declaration relates, is in conformity with the require-
ments of the Council Directive of June 1998 on the approximation
of the laws of the Member States relating to machinery. (EN792,
98/37/EC)
Harmonized Standards Applied: TC255N, EN792-6
National Standards Applied: EN 28662-1 & EN28662-7:1997
for Vibration Level. EN ISO15744:2002 for Noise Level
Machine Name: SX7131 3" Mini Random Orbital Sander
Serial No.: NK0110101 or higher
Free Speed: 15,000 RPM
Air Pressure: 90 psi (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 80 dBA sound pressure
with 3 dBA uncertainty per EN ISO15744. Vibration level
is 5.4 m/s2 tested per RE ISO 28927-3.
SX7120, SX7131, SX7230: Parts Breakdown & Operating Manual
Air Supply
Filter
Nipple
Oiler
Regulator
Drain Daily
(over 25 feet). Minimum hose diameter should be 3/8" I.D. and all
fittings should have the same inside diameter. See diagram to the
left for proper air supply setup.
Lubrication
Lubricate the tool each day after use with quality SAE #10 air
motor oil. Add the oil to the air inlet or into the hose at the nearest
connection to the air supply, then run the tool until all excess oil
is expelled from the exhaust. Total oil quantity needed for this
procedure is approximately 1 ounce. If using an air line lubricator
adjust to two drops per minute.
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc. Date of Issue: April 1, 2011.
Specifications
Disc Size.........................................................................2"-3"
Rated Power ................................................................. 0.3 HP
Free Speed ...........................................................15,000 RPM
Length ............................................................. 5.24" (133mm)
Weight ..........................................................1.23 Lbs. (.56 kg)
Avg. Air. Consumption. ............................... 2.07 cfm (59 l/min)
Air Inlet ......................................................................1/4" NPT
Min. Hose Size ...............................................3/8" I.D. (10mm)
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc. Date of Issue: April 1, 2011.
Specifications
Disc Size.............................................................................. 3"
Rated Power ................................................................. 0.3 HP
Free Speed ...........................................................15,000 RPM
Length ............................................................... 5.7" (145mm)
Weight ..........................................................1.34 Lbs. (.60 kg)
Avg. Air. Consumption. ............................... 2.06 cfm (58 l/min)
Air Inlet ......................................................................1/4" NPT
Min. Hose Size ...............................................3/8" I.D. (10mm)
3
SX7120
SX7131
06/08/11
Publicité
