Publicité
Les langues disponibles
Les langues disponibles
II. 4 "Pin lock" mode
Pin lock display
II. 4 "Pin lock" mode
In pin lock mode, press power key
to activate pin seeker scan function.
Then target rangefinder aiming point at flag pole and scan. When to flag
pole distance is measured, the reading will be kept and the flag on scree
will blink to show that the flag distance is locked.
Angle
Angle compensated
distance
II. 5 "Golf distance correction" mode
Short press power key
to activate "scan pin seeker ranging". The mea-
sure method is the same as "pin seeker mode". After acquiring distance
to flag pole, the angle is measured at the same time. Rangefinder then
starts ballistic calculation. The angle compensated distance will show al-
ternatively with angle on the screen.
14
Publicité
