II.2.1 Single ranging mode
Short press
power key to start ranging, the circle around the aiming
dot will blink, which means laser sent out. Reading will be available
then.
Ranging display
II.2 "ranging" mode
Reading display
II. 2.2 Scan ranging mode
Under ranging mode, long press power key
to activate scan mode,
pan rangefinder across targets, readings will display continuously.
Distance display
II. 3 "Fog" mode
II. 3 "Fog" mode
Under fog mode, short press
to measure distance.
In this mode, the rangefinder will dismiss the interference of mist or rain.
The shortest distance should be bigger than 25m (>25m)
13