Axis P5532 Guide D'installation page 19

AXIS P5532/P5534 Installation Guide
Unit Connectors
Network connector – RJ-45 Ethernet connector. Supports High PoE (Power over Ethernet, IEEE
802.3at). Use AXIS T8123 High PoE Midspan 1-port (included). Shielded cables should be used to
comply with EMC.
Multi-connector – Terminal connector for connection of external equipment:
• Audio equipment
• Input/output (I/O) devices
• AC/DC power supply
When connecting external equipment to AXIS P5532/P5534, a multi-connector cable is required in
order to maintain the IP51 rating. The multi-connector cable can be purchased from your Axis
reseller. For more information, please see the User's Manual available from the AXIS Network Video
Product CD supplied with this product or from the website at www.axis.com
SDHC card slot – A standard or high capacity SD card (not included) is required to store images
locally in the network camera. To insert and remove the SD card, the camera's top cover must be
removed, see Install an SD card (optional), on page 7.
Note:
Before removal, the SD card should be unmounted to prevent corruption of recordings. To
unmount the SD card, go to Setup > System Options > Storage > SD Card and click
Unmount. For more information, please see the User's Manual available from the AXIS Net-
work Video Product CD supplied with this product or from the website at www.axis.com
Page 19