Installing The I-Fan; Mount The I-Fan And Manual Control - Fancom I-FAN MODULAR Notice

2.

Installing the I-fan

Install the I-fan and associated components as follows:
1. Mount the I-fan and manual control (MCA) (see page 2)
2. Connect the I-fan and manual control (MCA) (see page 5)
3. Install the protective screen (optional) (see page 10)
4. Test the I-fan (see page 11)
2.1

Mount the I-fan and manual control

Mount the I-fan
Mount the I-fan in or on a (roof) structure with sufficient load-bearing capacity.
The direction of airflow must be from the motor to the impeller.
There must be sufficient free airflow available to cool the motor.
Most I-fan units are too heavy to lift. Take the necessary precautions.
Take the dimensions of various types of I-fan into account when installing.
Type Ø A
mm
(inch)
..35 440 (17.3)
..40 502 (19.8)
..45 565 (22.2)
..50 628 (24.7)
..56 702 (27.6)
..63 775 (30.5)
..80 985 (38.8)
35 - 56
B Ø C
mm mm
(inch) (inch)
393 (15.5) 362 (14.3)
398 (15.7) 412 (16.2)
404 (15.9) 462 (18.2)
410 (16.1) 512 (20.2)
418 (16.5) 572 (22.5)
571 (22.5) 650 (25.6)
595 (23.4) 813 (32.0)
63 - 80
Gndfi
D
mm
(inch)
350 (13.8)
350 (13.8)
350 (13.8)
350 (13.8)
350 (13.8)
500 (19.7)
500 (19.7)
g
2