Dismantling The Crankset - Look ZED 3 Manuel

[ A ]
Take a 2.5mm Allen key and unscrew the screw in the
left nut.
Be careful to keep the screw on the nut and ensure
that the nut does not interfere with the frame.
[ C ]
Loosen the left nut until it releases the bearing.
[ E ]
Remove the crankset from the frame, taking care not
to scratch the crankset with the bearings or the frame
with the chainrings.

DISMANTLING THE CRANKSET

[ B ]
Insert the 2.5mm Allen key into the hole opposite the
locking screw and use it to turn the nut.
Be careful not to damage the crankset or the frame as
you loosen the nut with the Allen key.
[ D ]
Remove the nut by the left crank.
[ F ]
Remove the crankset from the frame. Check that the
2x 6810 bearings remain in place in the frame.
EN
Fig 13
39