Before Cleaning; Filling The Water Tank - Royal Steam and Swing Mode D'emploi

2 Before cleaning

2 Before cleaning
2.1 Unpacking
Unpack the appliance and all accessory parts
and check that the contents are complete
(Fig. 2).
ATTENTION:
Always transport/send the appliance in its
original packaging so that it does not
become damaged. Keep the packing mate-
rial for this purpose.
Dispose of any packing material that is no
longer required in accordance with the pro-
visions applicable in your country.
NOTE:
If you should notice damage due to trans-
port, then contact your dealer immediately.
2.2 Assembly
1. Assemble the stick by pushing together
the insert tubes and handle correspond-
ingly (Fig. 3). The lower insert tube is rec-
ognizable by the release button.
2. Insert the stick into the receiving end.
The release button (Fig. 4/1) clicks into
place audibly and noticeably.
NOTE:
If you want to remove the stick again, press
the release button (Fig. 4/1) and pull the
stick up and out.
3. Position a micro-fibre cleaning cloth on the
base and place the steam foot on top. The
cleaning cloth is held by velcro fastening.
Only on carpets:
4. Place the carpet sole plate (Fig. 7/3) on to
the steam foot (Fig. 7/1) and cleaning
cloth (Fig. 7/2).
12

2.3 Filling the water tank

1. Make sure that the appliance is turned off
and that the power cable has been pulled
out of the plug socket.
WARNING:
Never fill an appliance up with water when
the appliance is still connected to the mains
plug. There is a risk of electric shock.
2. Twist the filler cap anti-clockwise off the
water tank.
ATTENTION:
Do not add anything to the water. This could
destroy the appliance.
3. Fill the water tank with cold, clear tap wa-
ter using the refill container (Fig. 5) includ-
ed in the scope of delivery. Do not refill
using any other containers. Be aware of
any residual water in the tank. There is a
risk of spilling water or overfilling the water
tank.
NOTE:
The service life of the appliance can be
extended by using distilled water instead of
tap water. This is recommended particularly
in those households with hard water.
4. Close the filler cap and check it is securely
in place.